How To Update Tiles In Bathroom

Updating the tiles in your bathroom is a great way to give it a fresh new look without having to do a complete remodel. It's a relatively easy project that can be completed in a weekend, and it can make a big difference in the overall appearance of your bathroom.

Here are the steps on how to update tiles in bathroom:

1. Preparation

The first step is to prepare the bathroom for tiling. This involves removing all of the old tiles, as well as any fixtures or hardware that may be in the way.

To remove the old tiles, you can use a hammer and chisel or a power tool such as a rotary hammer. Be careful not to damage the walls or floor when removing the tiles.

Once the old tiles have been removed, you need to clean the surface where the new tiles will be installed. This can be done with a sponge and a bucket of soapy water.

2. Installing the New Tiles

Once the surface is clean, you can begin installing the new tiles. Start by applying a thin layer of adhesive to the back of each tile. Then, press the tile into place on the wall or floor.

Use a level to make sure that the tiles are level and straight. You can also use spacers to ensure that the tiles are evenly spaced.

3. Grouting

Once the tiles have been installed, you need to grout them. Grout is a mixture of cement and sand that is used to fill in the gaps between the tiles.

To grout the tiles, you will need a grout float and a bucket of water. Mix the grout according to the manufacturer's instructions and then apply it to the tiles using the grout float.

Once the grout has been applied, you need to let it dry for several hours. Once the grout is dry, you can wipe away any excess with a damp sponge.

4. Sealing

The final step is to seal the tiles. This will help to protect them from water and stains.

To seal the tiles, you will need a tile sealer and a paintbrush. Apply the sealer to the tiles using the paintbrush and then let it dry for several hours.

Once the sealer has dried, your new tiles will be complete.