Installing A Push Drain In Bathroom Sink

Installing a Push Drain in a Bathroom Sink

Push drains are a convenient and easy-to-use fixture for bathroom sinks. The drain stopper moves up and down with a simple push, eliminating the need for a separate lever or knob. This guide will provide you with step-by-step instructions on how to install a push drain in a bathroom sink.

Tools and Materials:

New push drain assembly
Adjustable wrench
Phillips head screwdriver
Putty knife
Plumber's putty
Flashlight
Old towels or rags

Procedure:

1. Turn Off the Water Supply:

Locate the water supply valves beneath the sink. Usually, one valve is for hot water, and the other is for cold water. Turn the valves clockwise to shut off the water supply to the sink.

2. Disassemble the Old Drain:

Place a towel or rags beneath the sink to catch any water or debris. Loosen the slip nut that holds the drain assembly in place with an adjustable wrench. Remove the old drain assembly by unscrewing it counterclockwise.

3. Clean the Sink Drain Hole:

Inspect the sink drain hole for any debris or buildup. Use a putty knife to scrape away any old putty or sealant. Rinse the drain hole thoroughly with water and let it dry.

4. Apply Plumber's Putty:

Roll a rope of plumber's putty into a ring slightly larger than the drain flange. Place the putty ring around the drain flange, ensuring it is evenly distributed and pressed firmly into place.

5. Install the New Drain Assembly:

Align the drain flange with the drain hole in the sink. Insert the drain assembly through the hole, ensuring the putty ring remains in place. Tighten the slip nut from underneath the sink using an adjustable wrench.

6. Connect the Drain Pipe:

Attach the drain pipe to the drain assembly. Make sure the connection is tight and secure. If necessary, use plumber's putty to seal the connection.

7. Test the Drain:

Turn on the water supply and let the sink fill with water. Check for any leaks around the drain assembly and tighten the slip nut if necessary. Press the drain stopper to ensure it opens and closes smoothly.

Additional Tips:

Use a flashlight to inspect the drain hole and connections for leaks or damage.
If the drain assembly has a pop-up mechanism, make sure it is properly aligned before tightening the slip nut.
Use a plumber's sealant or caulk to seal any gaps between the drain assembly and the sink if necessary.
If you encounter any difficulties during the installation process, consult a professional plumber for assistance.