Installing Lift Rod Pop Up Bathroom Sink Drain

Step-by-Step Guide to Installing a Lift Rod Pop Up Bathroom Sink Drain

Installing a lift rod pop up bathroom sink drain is a simple plumbing project that can be completed in a few easy steps. This type of drain is operated by a lever or knob that lifts the stopper up and down to control the flow of water. Here is a detailed guide on how to install a lift rod pop up bathroom sink drain:

Gather Your Tools and Materials:

Lift rod pop up bathroom sink drain
Adjustable wrench
Basin wrench
Plumber's putty
Flashlight

Step 1: Turn Off the Water Supply

Before beginning any plumbing work, it is important to turn off the water supply to the sink. Locate the shut-off valves under the sink and turn them clockwise to close them.

Step 2: Remove the Old Drain

Use the adjustable wrench to loosen the slip nut that holds the old drain in place. Once the nut is loose, you can remove the drain by hand or with the basin wrench. Be careful not to drop the old drain into the drain hole.

Step 3: Apply Plumber's Putty

Roll a rope of plumber's putty between your fingers and place it around the base of the new drain flange. The putty will help create a watertight seal between the drain and the sink.

Step 4: Install the New Drain

Insert the new drain into the drain hole and hand-tighten the slip nut. Use the adjustable wrench to further tighten the nut, but be careful not to overtighten and damage the drain.

Step 5: Install the Lift Rod

Attach the lift rod to the pop up stopper. The lift rod should be long enough to reach from the stopper to the lever or knob on the sink. Insert the lift rod into the hole in the sink and tighten the set screw to secure it.

Step 6: Connect the Pop Up Stopper

Connect the pop up stopper to the lift rod. The stopper should fit snugly over the drain hole. Use the flashlight to check if there is any light shining through the drain hole, which would indicate a leak.

Step 7: Turn on the Water Supply

Once everything is installed, turn on the water supply and check for leaks. If there are any leaks, tighten the slip nut or replace the plumber's putty as necessary.

Step 8: Adjust the Pop Up Lever

Adjust the pop up lever or knob to the desired height. The lever should be easy to operate and should not interfere with the sink faucet.

With these simple steps, you can easily install a lift rod pop up bathroom sink drain. This type of drain is a convenient and stylish addition to any bathroom, and it is sure to last for many years to come.