Kohler Bathroom Sink Drain Installation Instructions

Kohler Bathroom Sink Drain Installation Instructions: A Comprehensive Guide

Installing a bathroom sink drain is a relatively simple task that can be completed in a few hours. By following these step-by-step instructions, you can ensure that your new drain is installed correctly and will provide years of trouble-free use.

Before you begin, you will need to gather the following tools and materials:

Adjustable wrench
Plumber's putty
Drain assembly
Sink stopper

Step 1: Remove the old drain

To remove the old drain, simply unscrew the drain nut that is located underneath the sink. The drain nut is usually made of plastic or metal, and it can be removed by hand or with an adjustable wrench.

Step 2: Clean the sink opening

Once the old drain is removed, clean the sink opening with a damp cloth to remove any debris or residue. Apply a thin bead of plumber's putty around the opening, and then insert the new drain assembly into the opening.

Step 3: Tighten the drain nut

Tighten the drain nut by hand until it is snug. Do not overtighten the drain nut, as this can damage the sink or the drain assembly.

Step 4: Install the sink stopper

To install the sink stopper, simply insert the stopper into the drain opening and push down until it clicks into place.

Step 5: Test the drain

To test the drain, turn on the water and allow it to run for a few minutes. Check for any leaks around the drain or the sink opening. If you notice any leaks, tighten the drain nut or apply more plumber's putty around the opening.

Congratulations! You have now successfully installed a new bathroom sink drain.