Moen Two Handle Bathroom Faucet Cartridge Replacement

Moen Two Handle Bathroom Faucet Cartridge Replacement: A Comprehensive Guide

The bathroom faucet is an essential part of any bathroom, and it's important to keep it in good working condition. If your Moen two-handle bathroom faucet is leaking or dripping, it's likely that the cartridge needs to be replaced.

Replacing a Moen two-handle bathroom faucet cartridge is a relatively simple task that can be completed in about 30 minutes. Here are the steps involved:

Turn off the water supply to the faucet. There will be two shut-off valves under the sink, one for the hot water and one for the cold water. Turn both valves clockwise to shut off the water.
Remove the handle. The handle is held in place by a screw. Use a screwdriver to remove the screw and then pull the handle straight up to remove it.
Remove the cartridge retainer nut. The cartridge retainer nut is located behind the handle. Use a wrench to loosen the nut and then remove it by hand.
Pull out the old cartridge. The old cartridge will be held in place by a rubber O-ring. Grip the cartridge firmly and pull it straight out of the faucet body.
Insert the new cartridge. The new cartridge will come with a new O-ring. Insert the cartridge into the faucet body and push it in until it is seated against the O-ring.
Replace the cartridge retainer nut. Thread the cartridge retainer nut onto the faucet body and tighten it with a wrench.
Replace the handle. Align the handle with the cartridge and push it down onto the faucet body. Tighten the handle screw to secure it.
Turn on the water supply and check for leaks. If there are any leaks, tighten the cartridge retainer nut or the handle screw until the leak stops.

Replacing a Moen two-handle bathroom faucet cartridge is a simple task that can be completed in about 30 minutes. By following these steps, you can save money and keep your faucet in good working condition.

Tips for Replacing a Moen Two-Handle Bathroom Faucet Cartridge

Here are a few tips to help you replace a Moen two-handle bathroom faucet cartridge:

Before you start, make sure you have all the tools you need. You will need a screwdriver, a wrench, and a new cartridge.
If you are not comfortable replacing the cartridge yourself, you can call a plumber for help.
Be careful not to overtighten the cartridge retainer nut or the handle screw. This can damage the faucet.
If you have any questions, refer to the instructions that came with your new cartridge.

Replacing a Moen two-handle bathroom faucet cartridge is a simple task that can be completed in about 30 minutes. By following these steps and tips, you can save money and keep your faucet in good working condition.