Remove Moen Bathroom Faucet Handle

Essential Guide to Removing a Moen Bathroom Faucet Handle

Replacing or repairing a bathroom faucet handle can be a relatively simple task that requires minimal plumbing experience. If you have a Moen bathroom faucet, removing the handle is straightforward and can be completed in a few easy steps.

Before you begin, gather the necessary tools: a Phillips head screwdriver, an adjustable wrench, and a cap remover tool (if needed). Ensure the faucet is turned off and the water supply is shut off before starting.

Step 1: Remove the Cap

Depending on your Moen faucet model, there may be a small cap on the top of the handle. Use the cap remover tool to gently pry off the cap.

Step 2: Access the Screw

Once the cap is removed, you will see a screw hidden beneath it. Use the Phillips head screwdriver to remove the screw.

Step 3: Pull the Handle

With the screw removed, gently pull the handle straight up and off the faucet body. In some cases, you may need to use a small amount of force to loosen the handle.

Step 4: Remove the Cartridge (Optional)

If you need to replace the faucet cartridge, you can do so after removing the handle. Use the adjustable wrench to loosen the cartridge nut and pull the old cartridge out. Insert the new cartridge and tighten the nut by hand.

Step 5: Reattach the Handle

Place the handle back onto the faucet body and align the screw hole. Insert the screw and tighten it securely using the Phillips head screwdriver.

Step 6: Replace the Cap

Once the handle is secured, replace the cap by pressing it back onto the top of the handle.

Congratulations! You have successfully removed and replaced the handle on your Moen bathroom faucet. Turn the water supply back on and check for any leaks before using the faucet.