Removing Bathroom Sink And Cabinet Hinges

Removing Bathroom Sink and Cabinet Hinges

Upgrading your bathroom can involve replacing the sink or cabinet, and removing the existing hinges is an essential step. Here's a comprehensive guide on how to remove bathroom sink and cabinet hinges safely and efficiently:

Tools and Safety

Gather the necessary tools:

Phillips head screwdriver or a power drill with a Phillips head bit
Adjustable wrench (optional)
Cloth or rag
Safety glasses

Wear safety glasses to protect your eyes from flying debris.

Removing Sink Hinges

Most bathroom sinks are secured with clips or brackets. Locate these on the sides of the sink and detach them by pressing on the release levers or unscrewing the fasteners.

Once the clips or brackets are removed, carefully lift the sink straight up and away from the cabinet. Be mindful of any plumbing connections that may need to be disconnected.

Removing Cabinet Hinges

Cabinet hinges come in various types, but the most common are:

Butt Hinges

These are the flat hinges that are attached to the inside of the door and the cabinet side. To remove them:

Locate the hinge pin at the center of the hinge.
Insert a Phillips head screwdriver through the hole in the hinge pin and tap it gently with a hammer to loosen it.
Once the pin is loose, pull it out with your fingers or use pliers.
Lift the door off the cabinet.

Concealed Hinges

These hinges are hidden within the cabinet and the door. To remove them:

Open the door completely.
Use a Phillips head screwdriver to unscrew the adjustment screws located on the hinge.
Once the screws are removed, the door should release from the cabinet.

Piano Hinges

These continuous hinges run along the entire length of the door and cabinet. To remove them:

Locate the screws securing the hinge to the door and cabinet.
Use a Phillips head screwdriver or an adjustable wrench (if the screws are hex head) to remove the screws.
Carefully lift the door off the cabinet.

Tips

To avoid damaging the hinges or cabinet:

Ensure that your screwdriver or power drill is the correct size for the screws.
Do not overtighten the screws when reinstalling the hinges.
If you encounter any stubborn screws or hinges, use a penetrating lubricant and let it sit for a while before attempting to remove them.

By following these steps and taking the necessary precautions, you can successfully remove bathroom sink and cabinet hinges and prepare for your bathroom upgrade.