Removing Stuck Bathroom Sink Faucet

Removing a Stuck Bathroom Sink Faucet

A stuck bathroom sink faucet can be a frustrating problem, but it's usually one that can be fixed with a few simple tools and a little know-how. Here are the steps on how to remove a stuck bathroom sink faucet:

Gather your tools. You will need a few basic tools to remove a stuck faucet, including a wrench, pliers, and a screwdriver. You may also want to use a penetrating oil to help loosen the faucet.

Turn off the water supply to the faucet. This is usually done by turning off the valves located under the sink. Once the water is turned off, open the faucet to release any remaining water.

Loosen the nuts that hold the faucet in place. These nuts are usually located under the sink and can be loosened with a wrench. If the nuts are too tight to loosen by hand, you can try using pliers.

Remove the faucet from the sink. Once the nuts are loosened, you should be able to pull the faucet straight up and out of the sink.

If the faucet is still stuck, you can try using a penetrating oil. Apply the oil to the threads of the nuts and let it sit for a few minutes. This will help to loosen the nuts and make them easier to remove.

Once the faucet is removed, you can clean the threads of the nuts and the faucet body with a wire brush. This will help to remove any debris that may be preventing the faucet from being reinstalled.

Apply a thin layer of plumber's grease to the threads of the nuts and the faucet body. This will help to lubricate the threads and make it easier to reinstall the faucet.

Reinstall the faucet by inserting it into the sink and tightening the nuts. Make sure not to overtighten the nuts, as this could damage the faucet.

Turn on the water supply and check for leaks. If there are any leaks, tighten the nuts until the leak stops.