Repair Leaking Delta Bathroom Faucet

Repair Leaking Delta Bathroom Faucet - A Comprehensive Guide

A leaky faucet is not only annoying, but it can also waste a significant amount of water and increase your utility bills. If you're dealing with a leaky Delta bathroom faucet, don't worry - it's usually a relatively easy fix that you can do yourself. Here's a comprehensive guide to help you repair your leaky Delta bathroom faucet:

1. Gather the Necessary Tools

Before you start, gather the following tools:

Adjustable wrench
Phillips head screwdriver
Flat head screwdriver
Replacement O-rings (if necessary)

2. Turn Off the Water Supply

Before you do any work on the faucet, you need to turn off the water supply. This is usually done by turning off the valves under the sink. If you don't know where the valves are, consult your faucet's installation manual.

3. Disassemble the Faucet

Once the water supply is turned off, you can disassemble the faucet. Start by removing the aerator, which is the small screen at the tip of the spout. Next, use the adjustable wrench to loosen the packing nut, which is located at the base of the faucet handle. Once the packing nut is loose, you can remove the handle.

4. Inspect the O-Rings

Once the faucet is disassembled, inspect the O-rings. O-rings are small rubber gaskets that create a seal between the different components of the faucet. If the O-rings are damaged or worn, they can cause the faucet to leak. If you see any damaged O-rings, replace them with new ones.

5. Reassemble the Faucet

Once you've replaced the O-rings, you can reassemble the faucet. Start by tightening the packing nut. Next, reattach the handle and tighten it with the adjustable wrench. Finally, screw on the aerator.

6. Turn On the Water Supply

Once the faucet is reassembled, turn on the water supply and check for leaks. If there are any leaks, tighten the packing nut or replace the O-rings again. If you're still having problems, you may need to call a plumber.