Repair Moen Double Handle Bathroom Faucet

Repairing a Moen Double Handle Bathroom Faucet

Moen double handle bathroom faucets are a common feature in many homes. They are known for their reliability and durability, but even the most well-made faucets can eventually develop problems. If your Moen double handle bathroom faucet is leaking, dripping, or otherwise not working properly, it is important to repair it as soon as possible to prevent further damage to your bathroom.

There are several common problems that can affect Moen double handle bathroom faucets. These include:

Leaking from the handles
Dripping from the spout
Difficulty turning the handles
Loose or wobbly handles

The good news is that most of these problems are relatively easy to repair. With a few simple tools and a little bit of time, you can get your Moen double handle bathroom faucet working like new again.

Tools and Materials You'll Need

Before you start repairing your Moen double handle bathroom faucet, you will need to gather the following tools and materials:

Phillips head screwdriver
Flat head screwdriver
Adjustable wrench
Replacement faucet cartridge(s)
Plumber's putty
Rags or towels

Step-by-Step Repair Instructions

Once you have gathered your tools and materials, you can follow these step-by-step instructions to repair your Moen double handle bathroom faucet:

1. Turn Off the Water Supply

The first step is to turn off the water supply to your bathroom. This will prevent water from leaking out while you are working on the faucet.

2. Remove the Handle Caps

Once the water supply is turned off, you can remove the handle caps. These are usually small, plastic caps that are located on the top of the handles.

3. Remove the Handles

Once the handle caps are removed, you can remove the handles. These are usually held in place by screws.

4. Remove the Cartridge

Once the handles are removed, you can remove the cartridge. The cartridge is a small, plastic or metal cylinder that is located inside the faucet body.

5. Inspect the Cartridge

Once the cartridge is removed, you can inspect it for damage. If the cartridge is damaged, it will need to be replaced.

6. Install the New Cartridge

If the cartridge is damaged, you will need to install a new one. To do this, simply insert the new cartridge into the faucet body and tighten it in place.

7. Reinstall the Handles

Once the new cartridge is installed, you can reinstall the handles. To do this, simply insert the handles into the faucet body and tighten them in place.

8. Reinstall the Handle Caps

Once the handles are reinstalled, you can reinstall the handle caps. To do this, simply snap the handle caps into place.

9. Turn On the Water Supply

Once the faucet is reassembled, you can turn on the water supply. Check for leaks and make sure that the faucet is working properly.

Tips for Repairing a Moen Double Handle Bathroom Faucet

Here are a few tips for repairing a Moen double handle bathroom faucet:

If you are not comfortable repairing the faucet yourself, you can call a plumber.
Be sure to turn off the water supply before you start working on the faucet.
Use the correct tools for the job. A Phillips head screwdriver is needed to remove the handle caps and screws, while a flat head screwdriver is needed to remove the cartridge.
Be careful not to overtighten the screws or nuts.
If you are replacing the cartridge, be sure to use a new O-ring. The O-ring helps to create a watertight seal.

By following these tips, you can easily repair your Moen double handle bathroom faucet and get it working like new again.